What Is New – BBTLine’s RF Splitters And Directional Couplers

YouTube Videos

Datasheet Release – 8-Way RF Splitter – Version 2 – Surface Mount

Ten Devices Measured – 8 Way RF Splitter – Version 2 – Surface Mount

Dimensions are 2865 mils by 1093 mils

What Else Is New At BBTLine ? 

Introduction To BBTLine’s Surface Mount RF Power Dividers

Comparison – BBTLine_8Way_V1_SMT – MiniCircuits SEPS-8-272+

Comparisons –

between MiniCircuits And BBTLine’s Surface Mount RF Splitters  

Datasheet Release –

8-Way Version 1 Surface Mount Splitter

Bi Directional RF Coupler with SMP Connectors

Measurements –

Ten 8-Way Version 1 Surface Mount Splitters

Layout Modifications Significantly Increase the High Corner Frequency to 7 GHz for ALL of BBTLine’s RF Power Divider Products (Surface Mount and SMP Connector Versions)

S-Parameter Files –

S-Parameters Are Available For All Devices – see below and the products page

Comparisons –

Between MiniCircuits and BBTLine’s Surface Mount RF Splitters.

Comparisons To MiniCircuits SEP2-2-63+, EP2W1+, SEPS-4-272+, SC4PS-33+, SEPS-8-272+ Are Found Below:  

Comparison – MiniCircuits SEPS-2-63+ – 2-Way SMT RF Splitter

Comparison – MiniCircuits EP2W1+ – 2-Way SMT RF Splitter

Comparison – MiniCircuits SEPS-4-272+ – 4-Way Version 1 SMT RF Splitter

Comparison – MiniCircuits SEPS-4-272+ – 4-Way Version 2 SMT RF Splitter

Comparison – MiniCircuits SC4PS-33+ – 4-Way Version 1 SMT RF Splitter

Comparison – MiniCircuits SC4PS-33+ – 4-Way Version 2 SMT RF Splitter

Comparison – BBTLine_8Way_V1_SMT – MiniCircuits SEPS-8-272+

Comparison – BBTLine_8Way_V2_SMT – MiniCircuits SEPS-8-272+

DataSheet Release –

8-Way Version 1 RF Splitter – Surface Mount – 500 MHz to 7 GHz

Measurement – 

Measurements-8-Way-RF-Splitter-Version1-Surface-Mount

Measurement –

Layout Modifications Significantly Improve High Corner Frequencies to 7 GHz For All Splitters (Surface Mount and SMP Connector Versions)

Layout Modifications Improve High Corner Frequency To 7 GHz

Measurements-2-Way-RF-Splitter-Surface-Mount

Measurements-4-Way-RF-Splitter-Version1-Surface-Mount

Measurements-4-Way-RF-Splitter-Version2-Surface-Mount

S-Parameters (For Your Simulator) –

These S-Parameter files will give you a very accurate representation of the performance of BBTLine’s RF Power Dividers since they are derived directly from measurements of typical Power Dividers…

S-Parameters-2-Way-RF-Splitter-Surface-Mount

S-Parameters-2-Way-RF-Splitter-SMP-Connectors

S-Parameters-4-Way-Version1-RF-Splitter-Surface-Mount

S-Parameters-4-Way-Version1-RF-Splitter-SMP-Connectors

S-Parameters-4-Way-Version2-RF-Splitter-Surface-Mount

S-Parameters-4-Way-Version2-RF-Splitter-SMP-Connectors

S-Parameters-8-Way-Version1-RF-Splitter-Surface-Mount

S-Parameters-8-Way-Version2-RF-Splitter-Surface-Mount

S-Parameters-Bi-Directional-RF-Coupler-Surface-Mount

S-Parameters-Bi-Directional-RF-Coupler-SMP-Connectors

DataSheet Release –

Bi-Directional Coupler – SMP Connectors – 800 MHz to Greater Than 6 GHz