Description
Evaluation Board – 2/4-Way Surface Mount RF Power Dividers
Evaluation-Board-2-Way-And-4-Way-SMT-RF-Splitters
This Evaluation Board Accommodates three Surface Mount RF Power Dividers From BBTLine: 2-Way, 4-Way Version 1, and 4-Way Version 2.
4-Way Version 1 has all five ports on one side.
4-Way Version 2 has its common port on the opposite side of four other ports.
The evaluation board has 13 SMP Male Smooth bore connectors.
The evaluation board also has “Pressure Plates”.
“Pressure Plates” apply pressure evenly over the Splitter EMI Shield Cans and create an RF-quality ground connection between the Splitter Ground Planes and the Evaluation Board Ground plane.
This allows the user to evaluate the Splitters without having to solder the Splitter ground planes to the evaluation board ground plane. Only the Evaluation Board RF Traces need to be soldered to the Splitter Half-Cut Vias.
Splitters do not come with this evaluation board – Splitters need to be ordered separately.
To make measurements, SMA Female To SMP Female breakout cables and Female SMP terminations will be needed…the below are recommended:
